LZ800X Automatic Cast iron pressure regulating balance valve
- Model
- L800X
Item specifics
- Nominal Pressure
- 1.0/1.6/2.5MPa
- Shell Test Pressure
- 1.5/2.4/3.75MPa
- Seal Test Pressure
- 1.1/1.76/2.75MPa
- Suitable Medium
- Water
- Medium Temperature
- 0-80℃
Review
Description
Brief Introduction
LZ800X differential pressure balance valve is a valve used to balance the pressure difference between the air-conditioning system supply / return water. This valve can increase system utilization, maintain accurate constant pressure difference, minimize system noise and the damage to the device which is caused by excessive pressure difference. This valve's superior to other balance valve is that it doesn't have any actuator, entirely rely on the medium pressure difference to achieve the function of balancing system, saving energy and installation space. It is an intelligent valve.
Parameters
Nominal Pressure | Shell Test Pressure | Seal Test Pressure | Suitable Medium | Medium Temperature |
1.0 MPa | 1.5 MPa | 1.1 MPa | Water | 0-80℃ |
1.6 MPa | 2.4 MPa | 1.76 MPa | ||
2.5 MPa | 3.75 MPa | 2.75 MPa |
Material
Part Name | Material |
Valve Cap | Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc. |
Spring | Spring steel, Stainless steel, etc. |
Diaphragm depressor | Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc. |
Diaphragm | NBR, PTFE, etc. |
Valve Rod | 45# steel, Stainless steel 2Cr13, 1Cr18Ni9Ti, etc. |
Valve Platen | Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc. |
Sealing Ring | NBR, PTFE, etc. |
Sealing Ring Platen | Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc. |
Valve Seat | Copper alloy, Stainless Steel |
Valve Body | Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc. |
Installation
Dimension