LZ500X Safety Pressure Relief Sustaining Valve

Model: LZ500X

Item specifics

Nominal Pressure: 1.0/1.6/2.5MPa

Shell Test Pressure: 1.5/2.4/3.75MPa

Seal Test Pressure: 1.1/1.76/2.75MPa

Suitable Medium: Water

Medium Temperature: 0-80℃

Review

Description

Brief Introduction

LZ500X Safety Pressure Relief Valve/ Pressure Sustaining valve is mainly used for fire control and other water supply system, to avoid system over pressure or maintain water supply system pressure. When pump closed, it can reduce water hammer. It can also been used in water hammer device in large water supply system. This valve is composed of main valve, needle adjust valve, pilot valve, ball valve and pipe system. The valve sets water supply system pressure by setting pilot valve spring pressure and needle valve open degree, and stabilize water supply system pressure with the feedback action fro pipe system and control room, no other device or energy needed, easy to maintain, pressure control is precise, performance is reliable

Parameters

Nominal Pressure	Shell Test Pressure	Seal Test Pressure	Pressure Adjustable Range	Suitable Medium	Medium Temperature
1.0 MPa	1.5 MPa	1.1 MPa	0-0.1MPa	Water	0-80℃
1.6 MPa	2.4 MPa	1.76 MPa	0-1.6MPa
2.5 MPa	3.75 MPa	2.75 MPa	0-2.5MPa

Material

Part Name	Material
Valve Cap	Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc.
Spring	Spring steel, Stainless steel, etc.
Diaphragm depressor	Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc.
Diaphragm	NBR, PTFE, etc.
Valve Rod	45# steel, Stainless steel 2Cr13, 1Cr18Ni9Ti, etc.
Valve Platen	Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc.
Sealing Ring	NBR, PTFE, etc.
Sealing Ring Platen	Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc.
Valve Seat	Copper alloy, Stainless Steel
Valve Body	Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc.