J145X Hydraulic automatic control valves

Model: J145X

Item specifics

Nominal Pressure: 1.0/1.6/2.5MPa

Shell Test Pressure: 1.5/2.4/3.75MPa

Seal Test Pressure: 1.1/1.76/2.75MPa

Suitable Medium: Water

Medium Temperature: 0-80℃

Review

Description

Brief Introduction

J145X Hydraulic automatic control valves is a automatic control valve, composed of main valve, solenoid valve(Normally closed) and check valve. Structure of this valve could be diaphragm type or piston type. This valve is designed and manufactured with the technology adopted and improved from USA and Israel. Suitable for the water supply, water draining and fire fighting supply of high-rise buildings. This valve has the advantage of remote opening and closing, can replace gate valve and butterfly valve, and easy to repair, working reliably. This valve could be used for water supply and water draining pipe of high-rise buildings, industry and agriculture, and life, to protect the pipe and device. This valve could be adjusted by needle adjusting valve to reach best open and close speed.

Parameters

Nominal Pressure	Shell Test Pressure	Seal Test Pressure	Solenoid Valve	Suitable Medium	Medium Temperature
1.0 MPa	1.5 MPa	1.1 MPa	220V AC or 24V DC Normally open or Normally close	Water	0-80℃
1.6 MPa	2.4 MPa	1.76 MPa
2.5 MPa	3.75 MPa	2.75 MPa

Material

Part Name	Material
Valve Cap	Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc.
Spring	Spring steel, Stainless steel, etc.
Diaphragm depressor	Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc.
Diaphragm	NBR, PTFE, etc.
Valve Rod	45# steel, Stainless steel 2Cr13, 1Cr18Ni9Ti, etc.
Valve Platen	Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc.
Sealing Ring	NBR, PTFE, etc.
Sealing Ring Platen	Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc.
Valve Seat	Copper alloy, Stainless Steel
Valve Body	Gray cast iron, Ductile iron, Carbon steel, Stainless steel, etc.