SRVHX Fire Control Resilient Seat Signal Non Rising Stem Gate Valve
- Model
- SRVHX
Item specifics
- Nominal Pressure
- 0.6-2.5MPa
- Suitable Medium
- Water， Oil，Sewage and so on
- Medium Temperature
- 0-80℃
- Test Standard
- GB/T13927-1992；JB/T9092-1999
Review
Description
Brief Introduction
SRRHX fire special resilient seat gate valve is often used in water supply and drainage, building fire systems and other pipelines, especially in the fire pipeline. The signal gate valve can clearly show the status of the valve open and close status, with intuitive, clear and reliable reflection of the fire system in the working state. If the installation position is higher from the ground, usually with a rising stem gate valve, you can clearly indicate the valve opening degree, if the installation location from the ground is low, you need to use gate valve with open indicator.
Specification
Nominal Diameter | DN50-1200 |
Nominal Pressure | 0.6-2.5 MPa |
Flange Connection | GB, ANSI,etc |
Pressure Test | GB/T13927-1992; JB/T9092-1999 |
Media | Water, sewage, oil, etc |
Working Temperature | 0-80℃ |
Main Material
No. | Name | Material |
1 | Hand Wheel | Ductile cast iron, Malleable cast iron, Carbon steel |
2 | Stem nut | Copper Alloy |
3 | Stand | Ductile cast iron, Gray cast iron, Cast steel |
4 | Gland | Ductile cast iron, Cast steel |
5 | Seal Ring | NBR/ EPDM |
6 | Stem | Carbon steel 45#/ Stainless Steel |
7 | Middle Washer | NBR/ EPDM |
8 | Disc | Ductile Iron + NBR or EPDM |
9 | Body | Ductile cast iron, Gray cast iron, Cast steel |
10 | Thrust Washer | Tin-bronze |
11 | Stem Sleeve | Tin-bronze |
12 | O-ring | NBR |
