Rigid Metal Conduit
- Model
- RMC
Item specifics
- Size
- 1/2 to 4 inch
- Description
- 1/2 to 4 inch
- Material
- Galvanized steel / Hot-dipped Galvanized
- Standard Length
- 3050mm or according to customer's requirement
- Application type
- protect and route cables and conductors
- Standard
- Meets CSA and UL safety standard 6
Review
Description
RIGID METAL CONDUIT
UL 6 ANSI C80.1
Rigid Metal Conduit is a circular cross-section canalization used for Electrical instalations in any type of building,
Rigid Metal Conduit is Hot-dipped galvanized on both external and internal.
Rigid Conduit is manufactured according to:American National Standards Institute, Inc.-ANSI C80.1
:Underwriters Laboratories Standard for Electrical Metallic Tubing.-UL 6
| CAT # | Trade Size | Outside Diameter | Wall Thickness | Length | |||
| Inch | mm | Inch | mm | Feet | mm | ||
| RMC012 | 1/2" | 0.840 | 21.34 | 0.104 | 2.64 | 10 | 3050 |
| RMC034 | 3/4" | 1.050 | 26.67 | 0.107 | 2.72 | 10 | 3050 |
| RMC100 | 1" | 1.315 | 33.40 | 0.126 | 3.20 | 10 | 3050 |
| RMC114 | 1-1/4" | 1.660 | 42.16 | 0.133 | 3.38 | 10 | 3050 |
| RMC112 | 1-1/2" | 1.900 | 48.26 | 0.138 | 3.51 | 10 | 3050 |
| RMC200 | 2" | 2.375 | 60.33 | 0.146 | 3.71 | 10 | 3050 |
| RMC212 | 2-1/2" | 2.875 | 73.03 | 0.193 | 4.90 | 10 | 3050 |
| RMC300 | 3" | 3.500 | 88.90 | 0.205 | 5.21 | 10 | 3050 |
| RMC312 | 3-1/2" | 4.000 | 114.30 | 0.215 | 5.46 | 10 | 3050 |
| RMC400 | 4" | 4.500 | 114.30 | 0.225 | 5.72 | 10 | 3050 |
| RMC500 | 5" | 5.563 | 141.30 | 0.245 | 6.22 | 10 | 3050 |
| RMC600 | 6" | 6.625 | 168.30 | 0.268 | 6.80 | 10 | 3050 |
| Notes: Applicable tolerance | |||||||
| Length: 10ft ±1/5in. 3050mm ±5.08mm. | |||||||
| Outside Diameter: 1/2" to 2 " ± 0.015 in.( 21.3mm to 60.3mm ±0.38 mm). | |||||||
| 2-1/2" to 4" ±0.025in. (73mm ±0.64mm). | |||||||
| 5" to 6" ±1% | |||||||
